When your hobby table looks like mine you need something that will A) make it look tidy and B) able to easily access all your hobby tools and paint brushes easily..
 |
| a bit of a mess. |
Step in the Hobby Zone Tool and Brush holder.
Arriving in a very sturdy card board box and full of bubble wrap
the first thing you notice is that it feels that its quality and the wood is thick and sturdy with all the cuts and holes are made precisely.
Armed with some wood glue the easy to follow instructions and masking tape I set to work building it.
The next step after glueing all the slats in place was to use the masking tape to hold everything together while the glue drys.
After this dried I added the lip around the edge which was made up of 2 pieces which were also glued and taped and then glued to the stand. Next were the two side parts that the brushed drop into.
After about an hour so the glue can dry (only took 5 mines to put together) it was done.
just look how tidy my table is now.
 |
| Nice and tidy! |
I think next I want to find some shelves or make some so I can easily get to my paints rather then storing them in a GW case. I don't have a lot of room so research is needed.
Any suggestions or if you have examples of a shelves to fit dropper bottles and GW paints let me know.
No comments:
Post a Comment